This Newb needs some help. I have used the 4th axis on the VF2 with no problems, but when I put it on our VF4 it errors out when it reaches a A move with 4decimal places (exp: A180.1234).
So my question is, did I miss a parameter setting change, or do I need to change my post to output a lessor decimal place output?........
Any help is much appreciated!
Tony
Thread: 4th axis parameters
Results 1 to 3 of 3
-
10-07-2009, 02:51 PM #1
Registered
- Join Date
- Nov 2008
- Posts
- 4
4th axis parameters
-
10-07-2009, 04:55 PM #2
Moderator
- Join Date
- Mar 2003
- Posts
- 927
Yes a Haas will only accept a 3 decimal place for a rotary axis..
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
10-07-2009, 08:12 PM #3
Registered
- Join Date
- Nov 2008
- Posts
- 4
Played around with post and made it work.
Reply With QuoteSimilar Threads
-
Need parameters for SMG
By RRL in forum FanucReplies: 0Last Post: 03-25-2009, 07:02 PM -
Cannot see my 900 parameters in my 0M-C
By elvicash in forum FanucReplies: 2Last Post: 02-25-2009, 02:44 AM -
G54 PARAMETERS
By Eperez in forum Controller & Computer SolutionsReplies: 0Last Post: 10-28-2008, 07:53 PM -
plc parameters
By savancnc in forum CNC Machine Related ElectronicsReplies: 2Last Post: 12-11-2007, 09:48 AM -
parameters for G71
By harrascustom in forum G-Code ProgramingReplies: 0Last Post: 04-09-2007, 04:06 PM
Posting Permissions
