[simonx]

Hello. System description:

SD3025D on COM1. Set: 19200/8/N/1/RTSxCTS/N
Win2k3SP2 - ArtGrave2002 licensed
Com Port Toolkit in Capture mode for a listening on COM1 port

Problem: I am unable to set depth on Z-axis. e.g. I have character "I" on my working sheet. By 2D ToolPath I am generating adequate path for engraver:



When I set "lift" parameter to "0" depth on Z-axis is independently on my other settings allways 80 mils = 1 mm: (from COM port sniffer)

IN;PA;;PU797,6348,0;PD797,6348,0;PD797,6348,80; (etc.)

if I set "Lift" to e.g. 5 mm, list is changed:

IN;PA;;PU797,6348,-400;PD797,6348,0;PD797,6348,80; (etc.)

Where is possible to "vector objects" to set Z-axis depth different from 1 mm (80 mils)? Where is set this "80"?

Thanks!

[turkhuu]

Hello. I bought artgrave 2002.But it's Chinese version. Please send me 2D, 3D and other these group buttons command window pictures?

Please

[atex1]

hi all you need artgrave 2002 english ver email me: [email protected]

[ilyas_khan]

hi all you need artgrave 2002 english ver email me: [email protected]

or the latest one

[nextgen]

or the latest one

Hi can somebody help me find artgrave in English version?

[yishengzhizuo]

文泰出国啦？