Need to solve the following problem:

I need to check if the servo/spindle drive is broken or not.
I have the following drives:
servo drive mitsubishi mds-c1-v2
spindle drives MDS-C1-SP-150, 260, 300.

My setup is:
Mitsubishi CNC MELDAS C64+sensor screen
one of the drive mentioned above
Motor HC353BS (or a different one for spindle)
Power supply MDS CV-260
All this is NOT connected to a machine.

I need to make the motor run in the Jog mode for example (or other modes if easier to implement) to see if the drive works.

If you help me to setup and configure/program these elements for what i want I will pay you $1000. I will get any components needed to make it work as well.

Let me know if you interested here in the thread or though a personal message.