Hi,
I have run into a wall when my old (really old...1989!) Dainichi F35 blew a chip due to voltage fluctuation. In the process of replacing the chip, I am told the parameters need to be re-entered.
The manuals I got with the machine, do not include the parameters or ladder diagram. I will be much obliged if anyone can please help me out by emailing me the manual or the parameter list.
My email Id is [email protected]
Thanks for looking..
Warm regards
Sanjeev
Results 1 to 4 of 4
-
10-14-2009, 09:18 AM #1
Member
- Join Date
- Oct 2009
- Posts
- 5
Parameters for Dainichi F30 with Fanuc 0TF
-
10-14-2009, 03:03 PM #2
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
The ladder and descriptions will be from the MTB. The parameter manual is from Fanuc but will only tell you what the description of the parameters are not what they should be set to. For that list you will also have to get from the MTB.
I emailed the parameter manual to you.
Stevo
-
10-14-2009, 09:06 PM #3
Member
- Join Date
- Oct 2009
- Posts
- 5
HI Stevo,
Thanks for the info and the manual. I have managed to also get hold of the parameter list for the machine from another forum.
Hope things fall in place tomorrow.
Regards
sanjeev
-
10-14-2009, 09:32 PM #4
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
Your welcome.
Good luck,
Stevo
Reply With QuoteSimilar Threads
-
Dainichi BX35 Fanuc 10T/F Input board error
By abselect in forum DNC Problems and SolutionsReplies: 15Last Post: 04-23-2019, 08:03 PM -
Parameters for Dainichi Lathe F35
By dbstream in forum FanucReplies: 4Last Post: 06-01-2016, 03:41 PM -
Fanuc 3t parameters
By lloydy304 in forum FanucReplies: 1Last Post: 10-31-2008, 01:38 PM -
Dainichi F15 CNC lathe with Fanuc OT
By F.Sharifi in forum FanucReplies: 0Last Post: 07-07-2007, 10:40 AM -
Lathe Dainichi F35 Fanuc 18TA - change diameter on radius
By jutek in forum FanucReplies: 1Last Post: 02-21-2007, 10:57 PM
Posting Permissions
