Hi everyone, we just bought an used Cincinnati 135 Ton brake press with an Hurco Autobend 7 backgauge control, they told me it was working fine before shipping to me and I notice the cable from the control box to the actual screen was damaged during shipping. Since its a 40 pin ribbon cable, I went to my local electronics store and have them made me a 10 foot replacement with computer ribbon cable, but it doesn't works, the screen doesn't comes on, I just hear a very mild sound coming from the screen PCB which is the normal sound of a CRT, but nothing comes on the screen.
Some of the buttons on the control make an alarm sound when you press them, but I have not accomplished any movement from the servos at all.
Any ideas would be greatly appreciated.
Best Regards