Hi all,
I am new to this forum and this is my first post. We own 2 Haas VMC (VF-0 and VF-1) both 1995 models. Recently I was checking the lubrication of the linear guides. I am informed that the valves of the oil lines must be replaced once in a while to make sure that all the linear guides are correctly lubricated.
I have removed the covers and noticed that it is difficult to reach/replace the valves (especially at the Z-Axis). Is there a way to replace them in a short time and how can I find out that the lubricating system is working correctly after replacing these valves?
Thank you guys in advance for the help.