I just bought a 1994 Okuma Howa ACT 2SP V5 with FANUC 18T control. This is a twin spindle machine with a left/right switch on the control panel. The right hand turret is in the shipping position (all the way down in Z) and near the chuck. The turret is loose - I can wiggle it by hand. I am getting a EX208 error on the turret. I do not have manuals for the machine.
Can anyone tell me what to do?
Thread: Okuma Howa Turret Loose
Results 1 to 3 of 3
-
10-31-2009, 12:52 PM #1
Registered
- Join Date
- Oct 2009
- Posts
- 4
Okuma Howa Turret Loose
-
10-31-2009, 10:13 PM #2
Member
- Join Date
- Mar 2009
- Posts
- 1982
take away tool number plate (3 or 4 bolts) and unscrew big bolts under it. This way You will start to disassemble the turret.
This knowlegde is based on a bit later 2ACT lathe turret. Suppose, it wil work.
-
11-02-2009, 12:09 PM #3
Registered
- Join Date
- Oct 2009
- Posts
- 4
Thanks for your help. We ended up taking the turret valve cover off and cycling the hydraulic valves until the turret was in the correct position. Something must have happened during shipping to move the turret.
Reply With QuoteSimilar Threads
-
Okuma-Howa HL-20
By howd in forum OkumaReplies: 15Last Post: 07-16-2014, 02:55 PM -
Okuma & Howa Millac 5VA
By SINUMERIKO in forum OkumaReplies: 9Last Post: 10-10-2009, 12:53 PM -
OKUMA-HOWA
By brucewhipple in forum OkumaReplies: 1Last Post: 02-24-2009, 01:26 AM -
Need Tech help for Okuma Howa
By plotthound in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 12-16-2008, 08:29 PM -
Difference between a Okuma & Okuma Howa
By 69owb in forum OkumaReplies: 7Last Post: 06-04-2008, 05:51 PM
Tags for this Thread
Posting Permissions
