[TheNigerian]

I set up my RhinoCAD profiling model in mm and posted it to Mach via RhinoCAM.

The resultant G codes are always in inches. ie G20 not G21

I am nearly done coding in VBA to effect the conversion of the lines of G code to mm but want to know how I can set RhinoCAM to post process in the native unit - mm- of my models.

Any help please?

[wildgrav]

From memory it is done in the Post Processor. When you edit the processor these is a box to tick. If you cannot find it I'll go look

Noel

[TheNigerian]

Thanks bud. But can you be a little more specific please?

I visited K2CNC's site and there are some links there that are supposed to help. k2cnc.com/Mach2_Mach3_setup.asp

It did not work for me. I will also look at this later in the day.

[wildgrav]

In RHINOCAM Browser click setup TAB, click the hammer spanner icon select Post Processor Generator, Click on MACH2, Edit. Under general tab select "mm"

[TheNigerian]

I really thank you. It was really quite easy and very helpful.

[cncfreakcncfrea]

Thanks, my problem is solved too.

http://tw.myblog.yahoo.com/cncfreakcncfreak