[underthetire]

We have a couple super precision lathes that were retrofitted with the 18iTB. Alpha drives, twin op panels. One machine spins CW with M3, the other one is opposite. Any parameter ideas? I was thinking 3706.7, and.6. I can not download parameters and compare easily. Thats a whole nuther story.

Thanks,.

[muddobber76]

Make sure your electrician wired up the machine correctly, at the wall,transformer, and machine breaker.

[underthetire]

Wouldn't make any difference on a Fanuc. SDU is not phase sensitive.

[shukongcn]

大家好，我是一位来至中国的数控爱好者，英语水平差，只能通过Google翻译简单的看一些帖子，欢迎大家 指点！
最近本人在国内做了一个关于数控编程方面的个人网页，想来这里找些资料，谢谢大家无私的帮助。我的个人网页 地址：http://cnc.cnc-cnc.com

Hello everyone, I'm a fan of NC come to China, English is poor, only through the Google translation of a simple look at some posts pointing welcome!
Recently, I have done at home on the NC programming aspects of a personal web pages, would like to came here to more information, thank you for the selfless help. My personal web page address: http://cnc.cnc-cnc.com

[fanucman]

We have a couple super precision lathes that were retrofitted with the 18iTB. Alpha drives, twin op panels. One machine spins CW with M3, the other one is opposite. Any parameter ideas? I was thinking 3706.7, and.6. I can not download parameters and compare easily. Thats a whole nuther story.

Thanks,.

i "think" and is say that loosely its 4000 bit 0 try changing it.. careful

[underthetire]

Multiple parameters, change some positive values to neg, and modified the ladder. Was not a simple fix.