:drowning: I am running a Program with the (new to me) laser cat 2503 from Trumpf and while most the progran runs fine When i get to the small radius squares in it the laser stays on and the axis just stop dead in there tracks. it will make a radius then straight line then radius then stright line then stop just befoe the 3rd radius. with the laser still on and burning??????
I know i am new to this so any help would be amazing...
Thanks Agian
AAI
Thread: Random Tool stop????
Results 1 to 2 of 2
-
11-20-2009, 04:17 PM #1
Registered
- Join Date
- Sep 2009
- Posts
- 7
Random Tool stop????
-
11-20-2009, 08:33 PM #2
Registered
- Join Date
- Sep 2006
- Posts
- 204
Trumpf 2503 code
Are you writing by hand or do you have software to generate the code? If you send me the code I maybe able to tell you what the problem is.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations for a lifetime.
Reply With QuoteSimilar Threads
-
Random Stopping - E-Stop Issue
By EvanZ in forum DIY CNC Router Table MachinesReplies: 6Last Post: 11-07-2008, 08:57 PM -
Random tool magazine to initial state?
By padobranac in forum FanucReplies: 7Last Post: 10-03-2008, 08:11 PM -
random tool-changer problem
By hicarbon07 in forum Community Club HouseReplies: 5Last Post: 08-28-2008, 12:00 AM -
Fanuc OM, Tool Table for Random ATC
By Titan Machine in forum FanucReplies: 5Last Post: 01-30-2008, 06:45 PM -
ABOUT stop for tool inspection
By marto74 in forum Haas MillsReplies: 9Last Post: 11-21-2004, 01:17 AM
Posting Permissions
