I have tracked down that the R90.1 is causing my alarm. From the picture I do not understand what is in the box that is causing this alarm. I think it is in the data table for the tools. Not sure what the "DSCHBSUB34" is. Please Help.
I have tracked down that the R90.1 is causing my alarm. From the picture I do not understand what is in the box that is causing this alarm. I think it is in the data table for the tools. Not sure what the "DSCHBSUB34" is. Please Help.
Hope it will help
RST reset
RST=0: RELEASE RESET
RST=1: RESET W1="0"
Activaction command
ACT=0 do not execute DSCHB instruction. W1 dose not change
ACT=1 Execute DSCHB . If the search data is found,table number where the data is store will be output .If the search data is not found ,W1 become 1
Regards
The tool number you are looking for does not exist in the data table - check again the table for missing tool numbers, duplicated ones, zeroes etc.