[mls]

How are you using your tools are you numbering them as you go are you using all system or manual tools or both in the same job I seem to run in to an issue and bobcad says I cant use both. Which if this is so oh well.

It seems to mess with my file and does not save properly.

I dont think it can be anything with having other things running at the same time on the computer email(outlook) internet etc.

It is a pretty powerful vista computer so I am not maxing it out.
Any help would be helpful I am going bald pulling my hair out.

Thanks Mike

[1234567]

What version are you useing?V22 had alot of bugs with tools.I always use manual tools and set the tool numbers as i go.

[mls]

v23 do you have all your tools in your tool library or just put in the tool dia as you go.

[mls]

v23 do you have all your tools in your tool library or just put in the tool dia as you go.

[1234567]

Yes i put in the tool dia and pick the tool number as i go.I never found a need to use the tool library.And dont forget in the cam tree under milling tools/ verify tool assignment/ you can renumber tool there also