First post, have read many helpful forums and almost every topic I needed is available. However I cannot find information for the following. Look for help, thanks in advance for any help you can give.
I just acquired 3 excellon quiet drill 1010 spindles from a drill machine. I did not get the controllers or any documentation for these. Looking for manual, specs, data and suggestions. Also need help on what VFD to use with this thing.
I have 3 home built cnc machines and would like to try one of these spindles.
It appears to be a water cooled spindle and apparently the collet is controlled by either air pressure or vacuum.
I will probably only use it to max of 20K RPMs so wonder if I still need the water cooling.