We are adding a second gantry to our DynaCNC table. Anyone know what truck model they used on the linear rails? All I can see is HG25 on the plastic wiper.
Results 1 to 3 of 3
Hybrid View
-
11-27-2009, 09:38 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 158
What linear trucks did DynaCNC use?
-
11-30-2009, 08:39 AM #2
Registered
- Join Date
- Dec 2005
- Posts
- 43
HIWIN linear rails HG will be the mod # and 25 the size goto HIWIN web site. You may be able to get this at your local bearing store.
Originally Posted by macona
-
07-02-2010, 06:39 PM #3
Registered
- Join Date
- Jun 2010
- Posts
- 0
I had to replace one of ours, and I found an exact replacement at McMaster-Carr -> linear rails/blocks.
Make sure you have a caliper and a bearing in hand to find the right one.
Reply With QuoteSimilar Threads
-
What is the smallest linear slide with trucks?
By widgitmaster in forum Linear and Rotary MotionReplies: 9Last Post: 08-26-2009, 07:06 PM -
Mixing Preloaded&Standard linear trucks on same rail -pros and cons ?
By isvflorin in forum Linear and Rotary MotionReplies: 2Last Post: 01-13-2009, 06:05 PM -
Rails for my NSK LH35 trucks.
By nate in forum Linear and Rotary MotionReplies: 0Last Post: 04-06-2008, 02:35 AM -
rc 4x4 trucks
By tnc in forum Hobby DiscussionReplies: 1Last Post: 11-19-2006, 11:47 PM -
Bearing Trucks
By camcam in forum Linear and Rotary MotionReplies: 9Last Post: 06-16-2006, 09:08 AM
Posting Permissions
