im using .125 4 flute carbide niagra coated endmill with .5 cut depth.
i need to machine 304 stainless slotting a profile what speed feed and depth would be a good place to start?
also flood coolant. trim E206 i believe
im using .125 4 flute carbide niagra coated endmill with .5 cut depth.
i need to machine 304 stainless slotting a profile what speed feed and depth would be a good place to start?
also flood coolant. trim E206 i believe
For HSS try 1100 rpm and 1.3 ipm; for carbide try 3500 rpm and 4.3 ipm. That's for a 300 series SS and was recommended by Michael Rainey's ME Consultant Pro software:
http://mrainey.freeservers.com
Good program!
Mike