South Bend Heavy 10L, Burke #4, Van Norman #12, South Drill Bend Press
A home machinist site you might like: www.Hobby-Machinist.com
Hello I'm a new guy from montgomery orange county area.. I have bought two set of plans and looking for some advice. I was wondering if you guys did start up a club or group
We haven't had a lot of interest yet. I'm still open to it if we can get some people together. What kind of plans did you buy?
I bought a set of plans from PDJ. I also have the metal mech ones as well. still trying to figure out what size that i should build. cnc noob to the core. i wanted to so a 4'x8' but i thinking that might be a little overkill since I'm using this for mold making and such.. have you seen or know of the pilot pro plans?
mold making in what material? its all about what you want to do.
I mainly use stuff from Smooth on . but I either make my molds from fiberglass and gelcoat, or out of a pink foam from home depot i just stack it up and shape it seal it and then make a rubber mold from it..
I guess I should have asked what material goes into the mold. I assumed you weren't machining 4x8 tool steel molds. For machining foam you don't need a ton of rigidity but you may want more Z travel than a router might have.
nono, Sorry i will be filling them with a gfrc concrete or a form of hard plastic.
I'm up for a Sept meeting. Lets see if we can get some interest. I could do a weekday after work or possibly a weekend day. What works for people?
I would come down if it's on a weekend. Since I'm new to all this being able to ask questions with a machine in front of you helps.
I'm down for a weekend meeting as well. preferably around 5:30 or after.
Also does anyone in this group have a CNC vertical milling machine???
I don't. I'm starting to piece build a 4x8 cnc table.
So will do you have any plans for a group meeting for this weekend or next weekend???
I might be able to do this Saturday at around 1pm for a couple hours. How many people would be interested?
can it be around 5:30pm on saturday???
Will are you going to have the Group meeting for this Saturday???
So far you are the only person who has expressed interest. I think I'll wait for more people.
What about EIdesignstudio??? I thought he had expressed interest as well.