[Aaditya1]

I have just bought these two machines in imaculate unused condition complete with pc's however the user manuals are missing and I have no idea how to work them. They are fitted with EOT Cranes control panels but also came with fanuc panels. I would like to use them as they are so can anyone help? please.

[hiatec]

Hello Aaditya1,

Tell me what do you need specifically and I might be able to help. I also have the manual for the EMCO Fanuc series O-TC if you are interested.

Regards,

John.

[CNC__User]

kj

[Alcost]

John, I would like to get a copy of the manuals for the Fanuc 0. Also do you know where I can get a copy of wincam. I have Winn and configure.

[DNukem]

Retiree/CNC Student...
Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Control Board.
I believe it has the ACC upgrade (don't really know what that means...)
Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
No install/operation manuals, No CDs, No media, No idea where to start.
Looking for any CDs, Manuals, Illustrations or guidance to get me going.
It appears that I may have to dig out one of my old 486 computers... Is that correct?
Please provide guidance, I will be eternally greatful.

Dick N.

[Diesel_Pilot]

Retiree/CNC Student...
Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Control Board.
I believe it has the ACC upgrade (don't really know what that means...)
Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
No install/operation manuals, No CDs, No media, No idea where to start.
Looking for any CDs, Manuals, Illustrations or guidance to get me going.
It appears that I may have to dig out one of my old 486 computers... Is that correct?

If the machine has ACC any PC will do. Contact Emco with your serial number and they will get you all the documentation and software you need.

[Deluminati]

Hello Aaditya1,

Tell me what do you need specifically and I might be able to help. I also have the manual for the EMCO Fanuc series O-TC if you are interested.

Regards,

John.

Hi John
I have a pc turn 50 with the Fanuc series 0 controller, do you have the manual for that?