[ktmrider]

Hi all. Newbe here. This is a great site.

To my question, just bought a Tree 320 w/ Fanuc controller and it has codes 14 and 15. Anybody happen to know what causes those codes and maybe how to fix them?

Thanks for any help.

[dcoupar]

What Fanuc? When do these codes occur?

[ktmrider]

I have not actually picked up the tool. All I have now is a picture. Maybe it will help ID.

[alexfanuc]

The photograph at the right is the spindle unit. It is an AC Analog spindle unit.
The controler, although you are not showing any pictures of the pcbs, might be a 6 control.
Where do you see the codes? and when do they appear?

Alexfanuc

[Leblondmakino]

On Fanuc 6 alarm 015 is "The number of the commanded axis exeeded that of allowable simultaneously controlled axes."
Fanuc 6 doesn't have a 14 alarm..?

John.

[Leblondmakino]

Has someone removed the 4th axis without changing the parameters..?

John.

[hrh]

This is not a FANUC control.

Yes, the machine is using a FANUC ac spindle (analog) drive which can actually be used with ANY controller that has a +-10V analog output for speed control.