MDA Precision. Our products are made in Germany and the USA
MDA Precision would like to introduce the
ELS 6000
The ELS 6000 Automatic Lead Screw retrofit kit for the WABECO D6000E manual lathe allows any D6000E manual lathe to perform CNC like operations. With Z and X-axis automation the ELS 6000 can perform a multitude of turning operations. The ELS 6000 does not require a computer, but comes with an easy to use hand held controller. Manual operation is fully maintained with an X-axis disengagement switch. You can purchase the WABECO D6000 Lathe with the ELS 6000 kit installed or just the ELS 6000 kit itself.
What it can do:
Turn
Outside
Inside (Boring)
Taper
Outside
Inside
Preprogrammed Morse
Preprogrammed Jacobs
Chamfer
Custom Angles
Thread
Inside
Outside
Left Hand
Right Hand
Radius
Convex
Concave
Face
To see the ELS 6000 in action please go to the following link:
[ame="http://www.youtube.com/watch?v=0QitqOt-haQ"]YouTube- Electronic Lead Screw (ELS 6000)[/ame]
The ELS 6000 Kit comes with everything you need to start CNC like operations with your WABECO D6000.
Includes:
Retrofit Includes:
• Hand held controller
• Motor Drive Box
• X and Z-axis motors
• Spindle Feedback
• Mounting brackets and hardware
• Step-by-step assembly instructions
If you are interested in purchasing the WABECO D6000 with the ELS 6000 option or just the ELS 6000 kit please contact us.
MDA Precision
Email: [email protected]
Phone: (408) 847-7796
http://www.mdaprecision.com