586,114 active members*
3,337 visitors online*
Register for free
Login

Thread: Home position moved

Results 1 to 2 of 2
  1. 12-15-2009, 01:02 PM #1
    Jcip
    Jcip is offline Registered
    Join Date
    Nov 2006
    Posts
    28

    Home position moved

    I have a Mazak VTC-41 with a EIA/Mazotrol (Yasnac MX3) and the Home Position move .197 or 5mm, The home switch (dog) has no signed that it moved. I had to add .196 to the work offset

    What would cause this to happen?

    Jim C
    Reply With Quote Reply With Quote
  2. 12-15-2009, 11:02 PM #2
    Leelund
    Leelund is offline Registered
    Join Date
    Jun 2008
    Posts
    150
    If the switch is slow to pop out after coming off the home dog it will go to the next grid back. Check that the switch is not sticking.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How do i get the Fadal to show my zero position instead of its home position?
    By DSUDS in forum Fadal
    Replies: 4
    Last Post: 10-28-2009, 06:39 AM
  2. Need Help Re-Set Home Position on Okuma
    By PSSJEFF in forum RFQ Feedback
    Replies: 0
    Last Post: 02-09-2009, 04:35 PM
  3. Change TL-1 Home Position
    By jmanjohns in forum Haas Lathes
    Replies: 3
    Last Post: 06-18-2008, 10:56 PM
  4. Home Position
    By Mooser in forum Tormach Personal CNC Mill
    Replies: 24
    Last Post: 03-26-2008, 04:30 PM
  5. New guy questions home position
    By washingtondude in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 04-19-2006, 03:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules