I am trying meshcam the end resault does not look like photo??
what cutters do you all use???I used a .187 ballmill i wantto go over it with
a v cutter i will try a center drill till i get more info on this> Help please
Thank you
Buzz (group)
I am trying meshcam the end resault does not look like photo??
what cutters do you all use???I used a .187 ballmill i wantto go over it with
a v cutter i will try a center drill till i get more info on this> Help please
Thank you
Buzz (group)
A 60 degree carbide v bit is what I use