I need a few small parts drawn. It would be best if you were near my area because I have some prototypes that you would have to pull measurements from. All are small parts ranging from 2.5"x1.5" to 3.5"x5.0".
My zip is 32922 that is east of Orlando FL. Thanks
Thread: Needing a few parts drawn.
Results 1 to 10 of 10
Threaded View
-
12-20-2009, 12:39 AM #1
Registered
- Join Date
- Dec 2009
- Posts
- 26
Needing a few parts drawn.
Reply With QuoteSimilar Threads
-
D2 drawn down toooo long
By orionstarman in forum MetalWork DiscussionReplies: 3Last Post: 12-21-2007, 01:42 AM -
BCC Tech says that this shape can't be drawn with V22
By TZ250 in forum BobCad-CamReplies: 11Last Post: 12-02-2007, 08:13 PM -
Needing method for creating duplicate parts
By Brian Queen in forum G-Code ProgramingReplies: 36Last Post: 08-31-2007, 11:10 PM -
Click On Drawn Entities
By TURNER in forum Visual BasicReplies: 1Last Post: 05-17-2007, 04:41 PM -
What have you drawn and built entirely on bobcad??
By AMCjeepCJ in forum BobCad-CamReplies: 23Last Post: 01-31-2006, 09:09 PM
Posting Permissions
