[ibuildstuff4u]

I made two of these cool little spindle lights for the X2 mill and only need one so the second is up for bid and I started the auction cheap.

Thanks for checking it out.

Dale P.

http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1182

[Adam Baker]

Wow, very cool idea!!

[pete from TN]

Just out of curiosity, If I gave you the dimensions of my spindle face could you sell me one for my Lathemaster mill. I have been wanting to make one but I do not have the time. PM me if you want what you would charge me and If I can afford it I would love one!! Nice looking work and also is it at all waterproof? peace

[Farasien]

First, are you planning on making any more of these? If not, could you put up some plans for them along with the electronics so we might make our own? There was something to this affect a while back on the 'zone, but the plans were somewhat vague and most were hand-drawn.

Just curious...

-Farasien

[ibuildstuff4u]

Sorry I don't have time to make any more of them my self, but I would be more than happy to share the dimensions and some more picts so you can build your own.

As for water proof, yes it is. The LED's are glued into place with 5 min epoxy which seals them from coolant.

I will post something tomorrow or Monday about the plans.


Dale P.

[Adam Baker]

Wow, I'd love to get a set of the plans as well. Would love to have something like that in the future.