[whallnut]

I am starting up a used Strippit SPM 750 punch press for customer of mine. The thing is in pretty rough condition. I have gotten to a point where the machine will run a motion profile if no punch is selected. As soon as a punch is initiated, an error 2003 <Press drive fault> is displayed. There is no output to the valves. I have a generic wiring diagram from Strippit and a operations manual but it has no alarm troubleshooting section. The machine was not built by strippit and they no longer support the thing. Anyone have any experence with one of these bastard machines.

[Applicam]

Hi,
We offer a complete retrofit package for this machine. We are based in the UK and are associated with Nisshinbo who manufactured this machine. The control is PC based, touch screen, graphical and runs all your existing G/M code programs. Can be fitted by yourselves or we offer an installation service.
Go to HOME for our details.