Hi All,
Making a platform and using 1" dia. die pins to steady the lifting action. Question: How far from the edge of the work should I press the pins and bushings in to avoid deforming the edge?
Thread: Press fit question
Results 1 to 1 of 1
-
03-25-2010, 01:52 PM #1
Registered
- Join Date
- Dec 2009
- Posts
- 16
Press fit question
Reply With QuoteSimilar Threads
-
Selecting Press for home shop press brake
By tikka308 in forum Bending, Forging, Extrusion...Replies: 0Last Post: 12-29-2009, 05:51 AM -
NorthStar Press Brake For 20 Ton Shop Press anyone ever use one?
By dsmdude in forum Bending, Forging, Extrusion...Replies: 6Last Post: 04-13-2007, 10:01 PM -
Q: Press Fit
By Deviant in forum MetalWork DiscussionReplies: 6Last Post: 09-11-2006, 07:20 AM -
Really Basic Drill Press vs Mill Question!
By diarmaid in forum Uncategorised MetalWorking MachinesReplies: 9Last Post: 05-17-2006, 08:53 PM -
Question about a press fit diameter.
By l u k e in forum MetalWork DiscussionReplies: 23Last Post: 04-17-2006, 11:07 PM
Posting Permissions
