[Kent23]

Below is a link to a video of a dust shoe that does an excellent job of collection while allowing easy access for bit changes. The lower brush ring is attached with rare earth magnets which allows for easy bit access. The upper acrylic plate clamps around the router/spindle with one pinch screw.The shoe sells for $95.00 plus $15.00 S&H (additional shipping applies if outside the U.S.). If you are running the Hitachi M12VC router, the cooling exhaust blows straight down and needs to be diverted. An exhaust diverter for that router is an additional $10.00

Contact me at [email protected] to purchase. I will need to know which router/spindle you are using and your name and shipping address.

[ame="http://www.youtube.com/watch?v=t8ehFKTjZN4"]YouTube- Dust Shoe Demo[/ame]
Kent

[sureshmeditiya]

hi kent i need this one i have excitech cnc router from china and its spindle diameter for clamping is 3 inch please let me know price and delivery time
here are my details
name: suresh meditiya
company : optima technologies
add: AL-11 , Bonanaza Industrial Estate, Ashok nagar , Ashok Chakravati road,
Kandivali East, Mumbai-400101 , Maharashtra, India
my mobile no : 0091 9867205160
off no : 0091 22 40164967
please reply ASAP.