After several years of cleaning up after my TM-2 (leaky pig!) I have had some time and permission to spend some money so this is the frame I am planning to hang vinyl shower curtains from as soon as I get the hooksin. I will use magnets to hold the bottom of the curtain to the splash guards and hopefully 90% or better of the cutting fluid will return to the sump instead of messing my floor up. At the VERY least it will hold the chips from splattering on the walls!
Everything from McMaster. Couple of hundred bucks I estimate.
Thread: My "enclosure" thread
Results 1 to 2 of 2
-
01-21-2010, 12:23 AM #1
Registered
- Join Date
- Jan 2005
- Posts
- 49
My "enclosure" thread
-
01-21-2010, 02:40 PM #2
Registered
- Join Date
- Oct 2003
- Posts
- 3
on our tm-1 we just added abs plastic end pcs bolted to the splash guards to enclose the end and the very front of the ends and this keeps 95% of the coolnt and chips in
Reply With QuoteSimilar Threads
-
Voice Your Opinion On "POLYMER CONCRETE FRAME" Thread!
By walter in forum PollsReplies: 14Last Post: 11-13-2015, 02:57 AM -
Index to "Epoxy-Granite machine bases" thread
By walter in forum Epoxy GraniteReplies: 13Last Post: 12-02-2011, 05:45 AM -
Another My "New Enclosure" thread.
By R.DesJardin in forum Tormach Personal CNC MillReplies: 4Last Post: 01-31-2010, 03:55 AM -
My "Full Enclosure"
By kevperro in forum Tormach Personal CNC MillReplies: 1Last Post: 06-14-2009, 03:03 AM -
SpeedsCustom's "Set-Up-Shop" and project thread.
By CROSSHATCH in forum Benchtop MachinesReplies: 1Last Post: 11-11-2007, 05:40 AM
Posting Permissions
