586,106 active members*
3,049 visitors online*
Register for free
Login

Thread: MAZAK QTN8 one axis not homing

Results 1 to 3 of 3
  1. 01-19-2010, 02:27 PM #1
    ua6lfj
    ua6lfj is offline Registered
    Join Date
    Aug 2007
    Posts
    11

    MAZAK QTN8 one axis not homing

    Hi, we have mazak lathe with T32-2 control that lost parameters due to battery death. Machine was brain dead not reacting to any buttons. Using reinitialzng procedure found here in other thread we managed to bring it back into life. Butons were lit and screen came up with message [parameter error]Available with machine parameters were typed manually and saved. Machine does not show any errors and reacts to all controls as it shoud. Except one - it does not perform Z-axis homing. I can still jog axis both sides but cannot get it homed. Chuck, tail, spindel jog, turret etc all work just fine.

    What it could be?

    Thanks for any help.
    Reply With Quote Reply With Quote
  2. 01-19-2010, 03:57 PM #2
    ua6lfj
    ua6lfj is offline Registered
    Join Date
    Aug 2007
    Posts
    11
    Thanks to all! We cured this already.
    Reply With Quote Reply With Quote
  3. 02-19-2011, 10:33 PM #3
    TRANSATOOL
    TRANSATOOL is offline Registered
    Join Date
    Dec 2005
    Posts
    25
    Hello

    I have the same problem.. What did you do??
    Please help
    thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Y-axis not homing.
    By hotrob1 in forum Fanuc
    Replies: 13
    Last Post: 08-21-2009, 01:35 AM
  2. Homing a rotary axis?
    By Harryman in forum WinCnc
    Replies: 1
    Last Post: 12-24-2008, 06:19 PM
  3. Z axis homing problem
    By BillTodd in forum LinuxCNC (formerly EMC2)
    Replies: 4
    Last Post: 08-26-2008, 08:55 PM
  4. homing z-axis
    By wadero in forum MetalWork Discussion
    Replies: 1
    Last Post: 08-20-2007, 10:30 PM
  5. Problem With Homing X Axis
    By elalto in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 09-16-2006, 01:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules