586,626 active members*
2,440 visitors online*
Register for free
Login

Thread: problems with our new machine

Results 1 to 4 of 4
  1. 01-30-2010, 05:44 PM #1
    christophergott
    christophergott is offline Registered
    Join Date
    Jan 2010
    Posts
    3

    problems with our new machine

    hello folk
    the company i work for recently bought a hyundai turning centre with a fanuc ot control, the machines 10 years old!!!

    problems tapping, i'm trying to using G84 keep getting a ps alarm saying incorrect g code??? this also applies when tyring to deep hole drilling


    hope someone can help :@)


    thanks chris
    Reply With Quote Reply With Quote
  2. 01-30-2010, 07:48 PM #2
    lyfordln
    lyfordln is offline *Registered User*
    Join Date
    Mar 2006
    Posts
    56
    Your machine is probably not able to use the G80 series of Programs, I would think you have G70-G76 codes. The machine probably does not have rigid tap so assumming that, I usually use a pull-out or compression tap holder and program as follows.

    N10T1000
    G00G97S100M8
    X0Z1.0T1010M3
    Z.2
    G98G32Z-(DEPTH OF THREAD)F(1/#0F THREAD)M5
    G32Z.2M4
    M5
    G99Z1.0
    XOZOT1000
    M01

    PROGRAM THE FEED GOING IN AS A SLIGHT AMOUNT LESS AND THE FEED COMING OUT A SLIGHT BIT MORE SO THE THREAD DOES NOT PUSH OR PULL ON THE TAP.
    Reply With Quote Reply With Quote
  3. 01-30-2010, 08:03 PM #3
    CNCRim
    CNCRim is offline Registered
    Join Date
    Feb 2006
    Posts
    992
    Your machine doesn't support G84 that's what it's mean.
    The best way to learn is trial error.
    Reply With Quote Reply With Quote
  4. 02-02-2010, 03:23 PM #4
    stevo1
    stevo1 is offline Gold Member
    Join Date
    Jun 2008
    Posts
    1511
    PM sent.

    Stevo
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. CHMER EDM Machine problems
    By eshmx in forum EDM Discussion General Topics
    Replies: 2
    Last Post: 09-10-2010, 05:44 PM
  2. G54 problems, machine goes to "new" cord. but won't machine features
    By Mueller in forum BobCad-Cam
    Replies: 1
    Last Post: 11-24-2008, 11:32 PM
  3. Machine tracking problems
    By gup in forum Fanuc
    Replies: 0
    Last Post: 06-19-2008, 02:40 PM
  4. Do you have new machine problems?
    By ghyman in forum Fadal
    Replies: 5
    Last Post: 03-07-2008, 11:44 PM
  5. What would you do? (Problems w/new machine)
    By CrashMasterKev in forum Commercial CNC Wood Routers
    Replies: 57
    Last Post: 11-10-2006, 01:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules