Is there a way to enable jogging in all screens?
Now I can only jog from one screen....... And would like to be able to jog in all screens.
Thanks, Steve
Thread: Jog question
Results 1 to 6 of 6
-
02-11-2010, 02:42 AM #1
Registered
- Join Date
- Feb 2006
- Posts
- 133
Jog question
-
02-11-2010, 03:25 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
You need a jog on/off button on the screen to jog. You can add the button using the screen editor, Screen 4.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
02-11-2010, 03:31 AM #3
Registered
- Join Date
- Feb 2006
- Posts
- 133
Thanks, I'll check it out!
-
02-11-2010, 05:39 AM #4
Registered
- Join Date
- Feb 2006
- Posts
- 133
Thanks again! Worked like a million....... er... trillion bucks!
-
02-11-2010, 06:14 PM #5
Registered
- Join Date
- Jan 2009
- Posts
- 396
is there a tutorial on how to use screen 4? I am having a rough time understanding how it works.
-
02-12-2010, 03:17 AM #6
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
There are videos on the machsupport site.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
