[cncadmin]

Welcome to the new NCplot discussion forum.

[jhowelb]

This program sure is touchy about the system date so don't reset the date. NCPlot will refuse to EVER start again. BTW, there is appearantly NO way to purchase this software after it expires!!!

[MetLHead]

jhowelb,

I've sent you an email about this.

But, just to make it clear for everyone: NCPlot is still in BETA. This means it is not ready for release. Everything is still being tested and is subject to change. This includes the licensing system. If anyone has any suggestions in this regard, please post them here. I appreciate everyone who has responded with comments/suggestions. Once I feel that it is ready, I will set a price and give purchasing instructions. In the meantime, if you need more time to evaluate it, or feel it has expired before it was supposed to, then send me an email and I will send you a reset key.

Thanks,
Scott

[jhowelb]

Scott,
Your pgm is at this point out of service on my machine, I have other software to perform this function but I am interisted in helping you with your evaluation. I am 63 years old and severely handicapped with lung disease acquired in Viet Nam and so therefore I don't move very fast nor for long periods of time.
I have converted a Chinese mill-drill to cnc and have built a cnc router and as such I am uniquely situated to assist you and obviously have no alterior motivation.
If you would like my input then by all means, send me a "key".
I can post my findings here , if you like.
jhb

[MetLHead]

jhowelb,

Not a problem, I'll send you a key later today.

Scott

[turmite]

Hi Scott,

Is this the software that when Googled shows up as RAF?

Mike

[ger21]

No, Mike it's not. Try this. http://home.wmis.net/~smartinz/