Does anybody know of where I can purchase small amounts of ground brass bar stock, hopefully from stock. Like 6' or 12'.
My current need is 1 1/8" dia.
Thanks,
Does anybody know of where I can purchase small amounts of ground brass bar stock, hopefully from stock. Like 6' or 12'.
My current need is 1 1/8" dia.
Thanks,
Have you tried Yard Metals??
Welcome to Yarde Metals Online
One and an eighth is a large diameter bar. What Swiss do you have??
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
I have an SS-32 which will actually handle 1 1/4"
32 is a pretty common sized Swiss model.
I pretty sure Yard metals does not stock ground brass, but I will check again.
Banner Service they do great work and may have it in stock.
If not, their turnaround is usually pretty good.
Control the process, not the product!
Machining is more science than art, master the science and the artistry will be evident.
They look like a definate possiblity.
I have an email into them now.
Bill
Try Copper & Brass Sales http://www.copperandbrass.com
Or you could always have something Centerless Ground. We use Boston Centerless alot.
http://www.bostoncenterless.com
Farmers Copper was recommended for SMQ brass in this thread:
http://www.cnczone.com/forums/showthread.php?p=685818
Diameter is +/- 0.0015
I laughed so hard my daughter walked in the room and asked what was so funny!!
Thank you for the smile and for being such a great PM friend to me!! I'm so grateful for all your support and friendship...
__________________
Watch Remember Me Online Free