[Billet Sean]

I've been trying to download the Version 21 Demo for the last 2 days now. The file downloads fine and installs fine. But, when I go to open it, I keep getting the same errors:

Error Occured #42 => Registry Open Error
Error Occured #15 => File Missing

These 2 Errors will occur 3 times in a row. Then I'll see the register screen. When I click Register it give me the 2 ID codes and wants the 2 Passwords. Obvisiously I don't have them if I'm just trying the demo. So when I click Close & Register Later it gives me:

Error Occured #18 => Invalid LFHandle

Has anyone else had this problem? If so, how did you get it resolved? I'm getting annoyed very fast...(chair)

Thanks in advance,
Sean

[The One]

You must be running Windows 7 or Windows Vista. These errors are happening because the system is unable to access the registry to read and write information for the system.

Do this:
Right click on the BobCAD-CAM V21 icon and choose the Properties option in the pop-up menu.
Then click on the Compatibility tab.
At the bottom, check the box that says "Run this program as the Administrator."
Then click OK.
Now double click on the icon.'

The other option that you have, but this would have to be done everytime you want to open the software, is to right click on the icon and choose "Run as Administrator".

This should help, but post back if you still have trouble.

Regards

[Billet Sean]

I'll give it a shot and see what happens. Thanks for the help. I'll post back and let you know what I got. Thanks!

[Billet Sean]

Well... IT WORKED! Thanks again! I really appreciate it!