586,096 active members*
3,921 visitors online*
Register for free
Login

Thread: Screen size ?? What to expect?

Results 1 to 4 of 4
  1. 04-12-2005, 03:31 PM #1
    murphy625
    murphy625 is offline Registered
    Join Date
    Nov 2004
    Posts
    446

    Screen size ?? What to expect?

    I have designed my interface at 800x600 resolution on a 19" monitor.

    What's going to happen when I plug this in with a 15" flat screen or an older 15" monitor?

    I was reading the Camsoft manual and it was indicating that there could be a "sizing" problem with different monitors..

    Does anyone have any experience with this?

    EDIT: and one more question, has anyone ever tried to put this thing on dual screens ? WinXP is compatible with this if you have 2 of the same video cards.. Will the camsoft screen split ?

    Thanks,
    Murphy
    Reply With Quote Reply With Quote
  2. 04-12-2005, 04:14 PM #2
    camsoft
    camsoft is offline Registered
    Join Date
    Apr 2003
    Posts
    332
    Murphy,

    You'll be fine with a new monitor of any size. It is the resolution that matters. We have a 105" screen here in our class room and it shows the same as a 17" monitor.

    Tech Support
    CamSoft Corp.
    (951) 674-8100
    [email protected]
    www.cnccontrols.com
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 04-12-2005, 04:41 PM #3
    murphy625
    murphy625 is offline Registered
    Join Date
    Nov 2004
    Posts
    446
    Oh that's a good thing.. Whew! thanks...
    I take it you guys have never tried the dual screen thing?
    Murphy
    Reply With Quote Reply With Quote
  4. 04-12-2005, 05:20 PM #4
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is online now Community Moderator
    Join Date
    Dec 2003
    Posts
    24221
    Usually you get the same full display, as long as the resolution is the same.
    Al
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Does size really matter?
    By DAB_Design in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 03-20-2005, 11:27 PM
  2. for engraving pcb which is a good thread size for the lead screw?
    By NickLatech in forum DIY CNC Router Table Machines
    Replies: 11
    Last Post: 01-18-2005, 03:37 AM
  3. Ballscrew size -vs- project size
    By Alan T. in forum CNC Machining Centers
    Replies: 4
    Last Post: 10-19-2004, 02:53 AM
  4. pcboards and screen printing
    By lurch in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 10-17-2004, 07:40 AM
  5. What size steppers?
    By cnczoner in forum Uncategorised MetalWorking Machines
    Replies: 6
    Last Post: 05-19-2004, 05:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules