Does anyone have mastercam version 17 installed in a windows 7 pc. I dont have maintenance on my software to be able to afford and upgrade but my laptop is dynig.
Results 1 to 3 of 3
-
02-09-2010, 11:33 PM #1
Registered
- Join Date
- Jan 2004
- Posts
- 258
Mastercam version 17 and windows 7
-
02-10-2010, 11:03 AM #2
Power User
- Join Date
- Mar 2005
- Posts
- 461
I assume you mean version 7 ? There is no version 17 and the current release is X4-MU3.
If you do in fact mean version 7 there is a similar thread here asking the same question of version 8 with windows 7... The end result is that it doesn't work very well but some have had limited success.
http://www.emastercam.com/cgi-bin/ul...=036443#000000
-
02-10-2010, 09:52 PM #3
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
But if you mean X4 then yes as my box I am on right now is Win7 Pro 64 bit and runs GREAT.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With QuoteSimilar Threads
-
Mastercam 9.1 and windows 7
By Smackre in forum MastercamReplies: 28Last Post: 05-06-2022, 11:39 AM -
Mastercam 9 on Windows 7??
By iaknown in forum MastercamReplies: 12Last Post: 11-14-2014, 08:24 PM -
Which version of Windows 7 with Rhino 3?
By ddgman2001 in forum Rhino 3DReplies: 7Last Post: 08-06-2010, 09:43 AM -
Mastercam and Windows Vista
By Chuck Reamer in forum MastercamReplies: 17Last Post: 10-28-2007, 07:42 AM -
New Version out for Mastercam.
By crazythunder in forum MastercamReplies: 15Last Post: 10-12-2007, 11:08 PM
Posting Permissions
