As the title says, I wonder if there is any way at all to use the MR-J2S-200B with a DIY controller and PC in a similar way as I hear you can use the A variaty. Connecting it to step dir or similar, that is.
I happen to have a AC servo that goes with that series of controller, but I missed out on the servo drive. There is however a cheap MR-J2S-200B for sale. As far as I can read in the manual for this driver, it seems you need some sort of PC-card that's quite expensive, but I kindof hope that there is some way around that. (Yes I know, a bit of "a shot in the dark probably)
The problem it that there doesn't seem to be any nice way of using the Mitsubishi SSCNET(at least I think that's what it's called.) in a cheap way.
I hope there are some knowledgeable person/persons that maybe help me shed some light on this. Or just to tell me how impossible it it.