[Nikolica]

Before all, Happy New Year.

I search on this site electricall scheme of this driver, but I can not find. If is not problem to reply me link of cnczone's post where is scheme, or link from internet ? For me it is very important, because I must to control step motors with Arm7 microcontroller.

Thank you in advance

[awerby]

You might find this thread helpful: http://www.cnczone.com/forums/genera...-software.html

[Nikolica]

You might find this thread helpful: http://www.cnczone.com/forums/genera...-software.html

Thank you, I search there, but I can not find

[Nikolica]

Can anyone help me ?

[KOC62]

Maybe, ... but I'm not clear what you are asking.

Do you have a TB6560 board but don't know how to connect your motors to it?
Do you have an ARM7 board that needs to interface with the TB6560 board?
Is it motor wiring diagrams you are looking for?
Limit switches wiring?
Power supply wiring?

Please provide more details.

[john-100]

when I looked at the 3 & 4 axis TB6506 boards I was left with the impression designers arranged the connections to the printerport connector to make the routing of the PCB tracks easier
there is no guarantee boards from different manufactures will have assigned the same functions to any particular pin

you will need the manual for your board to be able to connect it to the "printer port" the Arm7 microcontroller emulates

John

[Nikolica]

when I looked at the 3 & 4 axis TB6506 boards I was left with the impression designers arranged the connections to the printerport connector to make the routing of the PCB tracks easier
there is no guarantee boards from different manufactures will have assigned the same functions to any particular pin

you will need the manual for your board to be able to connect it to the "printer port" the Arm7 microcontroller emulates

John

Thank you for your reply.
I know what to do with Arm7, but problem is with tb6560, because i do not know how to connect ''lpt port'' from tb6560 to Arm 7. I need help for driver, help for pins of comunication. Maybe lpt port is made for selling. simple business plan,

Maybe, ... but I'm not clear what you are asking.

Do you have a TB6560 board but don't know how to connect your motors to it?
Do you have an ARM7 board that needs to interface with the TB6560 board?
Is it motor wiring diagrams you are looking for?
Limit switches wiring?
Power supply wiring?

Please provide more details.

Thank you for your reply.
I know to connect motors on the board.
Yes, I would like to connect Arm 7 with Toshiba TB6560 driver. To control or send G code from Arm mcu to this driver.
TB6560 has 2 ports, LPT and Manual. For this I need schematic of TB6560 board, and I must see for what is used 15 pins from manual port, and 25 pins from lpt port.

[KOC62]

OK, we are getting somewhere now.
Understand that there are many variations of a TB6560 as they all use a TB6560 chip, but could use a different pinouts.
You didn't give us the model number of your board. Did it not come with a manual?

Here is an example that may not be the same as yours; http://www.fut-electronics.com/wp-co...ers_Manual.pdf

An example of a 3-axis TB6560 board; http://www.cncgeeker.com/images/manu...eCNCGeeker.pdf

[Nikolica]

Attachment 303454
I have this board, I do not know where is model number ?
CHIP : TOSHIBA TB6560AHQ

[john-100]

it could be this one

[KOC62]

Now follow the manual that john-100 gave you including the use of Mach 3. If you get the motors working you can then try your Arm 7 setup.

[Nikolica]

Thank you, thank you, thank you !