541,041 active members*
3,841 visitors online*
Register for free
IndustryArena Forum > Computer Technology > Desktops / Laptops > 386 lndustrial mother board
Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2021

    386 lndustrial mother board

    My CNC mill uses a 386 mother board. It stops at the second screen describing the 386 mother board. Then sometimes it will complete the boot and run a milling program. It is an Anilam 1100. Give me some help!

  2. #2
    Join Date
    Aug 2009

    Re: 386 lndustrial mother board

    ...before you do anything I suggests backing up the Config File(s) Step 7
    Series 1100 trouble shooting guide


  3. #3
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013

    Re: 386 lndustrial mother board

    That is a 25 year old system. Why not upgrade it to a modern control? There are a number of relatively inexpensive options available today. I would look at Dynomotion or Centroid products.
    Jim Dawson
    Sandy, Oregon, USA

Similar Threads

  1. The CNC Mother Board
    By avayan in forum Open Source Controller Boards
    Replies: 1
    Last Post: 11-30-2012, 10:59 PM
  2. The CNC Mother Board
    By avayan in forum Stepper Motors / Drives
    Replies: 3
    Last Post: 10-04-2012, 12:37 PM
  3. DX-32 Mother Board
    By minton in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 09-22-2011, 04:35 AM
  4. Mother Board Repair
    By minton in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 08-16-2011, 02:01 AM
  5. Mother board help
    By Stu D in forum Servo Motors / Drives
    Replies: 0
    Last Post: 07-28-2006, 02:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts