[tcr]

I'm designing 2 desks with 3 matching bookcases. The parts I need will be formed from 1.5" to 2" thick plywood (which I can supply) run through a CNC routing machine.

Here is what I need:

- 2 desktops (30" x 60" x 2")
- 14 shelves (14" x 29" x 1.5")
- 1 tabletop (18" x 95" x 1.5")

Your router should be able to handle at least the desktop-sized pieces, since I can have all the pieces rough-cut before routing. Being able to handle full 4' x 8' sheets of plywood might be best, though. (Shipping might be an issue...)

I can do the final sanding and finishing myself or have you do it.

I'd prefer a shop within 20 miles of 60601 (downtown Chicago).

Contact me for drawings and such. Thanks for your attention.

[lz1]

:bat:

I'm designing 2 desks with 3 matching bookcases. The parts I need will be formed from 1.5" to 2" thick plywood (which I can supply) run through a CNC routing machine.

Here is what I need:

- 2 desktops (30" x 60" x 2")
- 14 shelves (14" x 29" x 1.5")
- 1 tabletop (18" x 95" x 1.5")

Your router should be able to handle at least the desktop-sized pieces, since I can have all the pieces rough-cut before routing. Being able to handle full 4' x 8' sheets of plywood might be best, though. (Shipping might be an issue...)

I can do the final sanding and finishing myself or have you do it.

I'd prefer a shop within 20 miles of 60601 (downtown Chicago).

Contact me for drawings and such. Thanks for your attention.