[300sniper]

does any one have the 8" rotary table with a chuck and tailstock? i am wondering how much usable area there is between them with them mounted at extreme ends of the table. i am hoping to have about 16" but from the pictures it isn't looking like it is going to happen.

[TT350]

My first job was in 4 axes and I need more room this is what I done.
Look at the pic’s and you can see how I carried the key slots
off the end of the table so I could extend the distance between
the rotary table and the tale stock.
I can use the full X travel between centers now.
I removed my table and done this on my 9x49 mill.
To do this you will need a mill with at least 33” in the X.
Hope this helps.

This can be done with plates as well but I chose this rout
so I do have to use plates.

Chris

[300sniper]

i'll have to see what i can get unmodified but if i can't get 16" i think i will steal your idea there. thanks for posting the pics.

[TT350]

Buy the time you ad a live center you will be lucky to get 12"

[TT350]

If you go this rout and need more details I will be glad to help you all I can.

Chris