554,132 active members*
4,388 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    May 2015
    Posts
    14

    Adira Press Brake PMO 13530

    Hello..

    My Adira Press Brake PMO 13530 with adcontroll 10.
    The machine can't indexing/home position. This is used machine and new for us.

    any advice or manual book will be very appriciated.

    Regards,
    Komang.

  2. #2
    Registered
    Join Date
    May 2015
    Posts
    14

    Re: Adira Press Brake PMO 13530

    Quote Originally Posted by komang View Post
    Hello..

    My Adira Press Brake PMO 13530 with adcontroll 10.
    The machine can't indexing/home position. This is used machine and new for us.

    any advice or manual book will be very appriciated.

    Regards,
    Komang.
    Hello again..

    Today I checked the machine and tried move the axis using diagnose mode. For Y axis and X axis working good, only R axis alarm AX1152 Axis R1 forward LS sometimes backward LS depends where you move the axis. I tried disconnect LS cable to servo amplifier but the problem still same.

    Last I disable R axis on the parameter, and the machine can indexing/home position. But when we use the machine for production, for the closing the speed is very low. I have adjust speed on the axis parameter (fast descent parameter and work descent parameter) but nothing change.
    I remember previously on Amada HFT we have same problem because there are jump cable/brige on the robot connection. I don't know it's same problem or not and I need help to figure it out.

    Any help will be very appriciated.

    Regards,
    Komang

Similar Threads

  1. Adira press jitter error
    By joepesterey in forum Bending- and Punching Machines
    Replies: 0
    Last Post: 07-07-2022, 01:23 AM
  2. Replies: 0
    Last Post: 06-20-2021, 10:47 AM
  3. Converting Conventional Hydraulic Press Brake to CNC Press Brake with PC
    By aadityadengle in forum Uncategorised MetalWorking Machines
    Replies: 12
    Last Post: 12-29-2018, 03:32 AM
  4. Need Help with ADIRA Press Brake
    By buszkock in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 04-27-2017, 05:08 PM
  5. Adira QHA press brake manual
    By kenkad in forum Bending, Forging, Extrusion...
    Replies: 1
    Last Post: 01-08-2011, 04:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •