[FUBAR62172]

I have a RB 1 bed mill with a aniliam contol (mk 3300m)on it. I went to start the machine and it says "Operating System Not Found" (chair). There a appx 3/4" X 5" X 6" white box in controller with a ribbon cable coming out of it that is making a sparatic not nice sound . Any ideas will be greatly appriciated

[KEVINSTJ]

I wish I could help you out. I have a problem with my anilam 3200 not booting up. Seems like nobody on this site wants to give you any help with the Anilams.

[Larry Patterson]

I am looking for a Anilam 3300 Mk control system for parts. Any help would be appreciated. Please call Larry at 801 216 4576. Thank you

[ssoptical]

Larry, look up Lynn Electronics on the web, they specialize in older Anilam controlers.

[underthetire]

I wish I could help you out. I have a problem with my anilam 3200 not booting up. Seems like nobody on this site wants to give you any help with the Anilams.

I will try, but Anilam is not my specialty. The wite box with not so nice sounds is probably a hard drive, or possibly a floppy. Biggest problem i've found on all anilams is the white Molex connector on the main board. It is recommended to remove the pins from the connector body and solder them in place on the connector. Thats about all i've got.

[Larry Patterson]

Jerry Bouvier @ anilam.com or 716 661 1883