[fluvannabear]

Hello:
Not sure this is the right place but seems it might be. I am considering purchasing a 4 axis NEMA23 (425oz/in) TB6600 package from them to convert my G0484 Mill/Drill to CNC. The products ship from mainland China as best I can tell. Trying to get more information before I pull the trigger. Hope to hear from some others. Thanks and take care. Burt

[jeffrey001]

I would not be worry about the company but the TB6600 card.

Jeff

[fluvannabear]

I would not be worry about the company but the TB6600 card.

Jeff

jeffrey001: Thank you for the reply. Is there an issue with the TB6600? I have read that it is supposed to be an improvement over the TB6560. Do you have a recommendation for my application? As you may have guessed, I am very new at the CNC game. Take care. Burt

[jeffrey001]

Hi, sorry for the delay.

I don't like all in one board, particularly these TB models.

Buy one driver for each stepper like the one in the picture.

Jeff

[fluvannabear]

Jeff: Thanks for the information. Any comments regarding the DQ542MA Driver? Seriously considering a package with 4 of these included. Good for 50volts max so should cover what I need with the two included 36v/9.3A power supplies. Well back to studying the specs and identifying all the bits and pieces I need to get this thing together. Want to get it all at once if I can so I will know if I forgot anything. Also have to build a box to put it all in and figure out the wiring diagram. Still trying to figure out the connections between the Driver and the Breakout Board. Having fun tho, benefit of being retired. Take care. Burt

[victorofga]

take a look on kelinginc..
they have everything you need, and there are good diagrams, so you can build your control..

Automation Technology Inc

[jeffrey001]

If you can and it's not too late, go with 48 volts power supply.

Jeff

[fluvannabear]

Thanks for the responses.
victorofga: Sure will look at the offerings.
Jeff: not too late, will have to contact vendor and see about upgrade to 48v power supplies. Should not be much difference.
Take care. Burt