[kenax]

I'm looking for the tool change program for an Argo A-1 vertical drilling & tapping center with Fanuc 0M control. I lost the program memory due to P/S Alarm 101 and I thought I had the tool change macro backed up but can't find it anywhere.

Please email me kenaxcnc at elisanet dot fi.

[kenax]

Also, I would appreciate if someone knew why I get M/S/T Function timeout when trying to do a tool change in MDI mode with Txx and M06 commands?

[kenax]

Solved, got the macro from the supplier.

Here, if someone needs it:

09001;
N9001 G65 H1 P#1115 Q1;
G65 H82 P9001 Q#1015 R1;
G65 H1 P#1115 Q0;
G65 H81 P9002 Q#1014 R1;
G65 H1 P#131 Q#4003;
G91 G28 Z0 M19;
G30 Z0 M86;
G28 Z0;
G#131;
N9002 M99;

[Chrispick82]

Morning guys
I have a problem with my Argo A1 at the moment. I can move all the axis manually but when we try to operate a programme, it just stops. I have looked through the error code history and they are typically M01 0003 and M01 0007. Do any of you have any advice as I cant find anything in the books, thanks for your help.