545,502 active members*
2,207 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"
Results 1 to 2 of 2
  1. #1

    Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

    I have Arrow with Siemens Control. In the rack, I have DV5 servo board and Profibus DP Card. RT board is G7VP2. I lost bios settings after replace BIOS battery. When I set two interrupts IRQ7 and IRQ15 to ISA in the RT BIOS menu, the machine is undergoing diagnostics. All tests is passed but I have error "alarm 40-33 output/fuse failure on APC rack 0". Has anyone solved this problem? Does anyone have Flash and BIOS settings for RT G7VP2?

  2. #2
    Member
    Join Date
    Mar 2008
    Posts
    103

    Re: Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

    Serwis we reflash these using a binary program and floppy disk; then test the board in a simulator with a special I/O Board tester. The pn on the inside lip of the RTCPU board chassis is 3-424-xxxxAyy. This is what someone would need to know to perform the settings.

Similar Threads

  1. How can do ""manual stepper motor sizing for "rack and pinion"calculation""???
    By Medhat93 in forum Mechanical Calculations/Engineering Design
    Replies: 0
    Last Post: 03-03-2018, 01:50 AM
  2. please help : output file from Enroute have "plt" extension and not "cnc"
    By isam ali in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 06-29-2017, 03:15 PM
  3. Doosan Puma TT1800SY - APC "Alarm" on start up
    By Saranac in forum Daewoo/Doosan
    Replies: 6
    Last Post: 06-28-2015, 03:07 AM
  4. Replies: 6
    Last Post: 01-02-2014, 08:13 AM
  5. Replies: 2
    Last Post: 06-19-2013, 05:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •