After having the chance to play a bit with a machine that has a ATC I quickly noticed that its a bit uncomfortable to set the correct ATC XYZ Values in the Tool Table for the tools that are in the Magazine.
Therefore I wrote a quick and dirty script to handle this.
By default 10 Pockets are available, but this can easily be adapted in the script itself.
The XYZ Positions of the individual pockets needs to be configured correctly in the script (sorry, no fancy gui for that part, but this needs to be done only once)
Once that is done simply start the dialog and enter the tool number for each pocket.
This will set the configured XYZ Coordinates for all tools that are configured in the Dialog according to the configuration. All Other tools will be set to XYZ 0 for the ATC.

The Script can be found on my Github: