Hey guys my tool changer has gotten out of sequence on our Cadet 4020,it has a 5020M controller .Right now the controller says i have sequence # 3 and we need it to say sequence # 1.I have found this in my manuals once before but for some reason were just not finding it today.Please Help!!!!
Thread: ATC Sequence problem Cadet 4020
Results 1 to 3 of 3
-
04-03-2010, 05:32 PM #1
Registered
- Join Date
- Dec 2009
- Posts
- 67
ATC Sequence problem Cadet 4020
-
04-03-2010, 06:03 PM #2
Member
- Join Date
- Mar 2009
- Posts
- 1982
just a second, just a second.
Look at ATC sequence table. Maybe sequence #3 is "tool ready"? If You command T15 <write>, green button start, machine prepares tool #15 and is waiting for M6 at ATC sequence #3.
try M64 <write>, green button start and M63 <write>, green button start from MDI mode and see if sequence number will change
-
04-03-2010, 07:35 PM #3
Registered
- Join Date
- Dec 2009
- Posts
- 67
We found it in manual, was just blind with frustration. Once we went and got lunch, came back and walked right thru it.Thanks for attempt to help
Reply With QuoteSimilar Threads
-
Fadal VMC 4020 - Spindle Load Problem
By phat in forum FadalReplies: 12Last Post: 07-14-2016, 10:28 PM -
Fadal 4020 Milling Spindle Problem
By Xavior in forum FadalReplies: 2Last Post: 01-08-2010, 03:04 AM -
4020 rigid tap problem
By charliemisa in forum FadalReplies: 6Last Post: 12-08-2009, 04:13 PM -
Okuma cadet mate 4020 -OSP700M 1999
By Taehk in forum OkumaReplies: 2Last Post: 06-21-2009, 03:23 PM -
cut sequence
By camtd in forum SurfcamReplies: 2Last Post: 06-13-2006, 05:26 PM
Posting Permissions
