Hello Everyone,

So I have spent hours on these forums, read all the Mach3 setup instructions and UC100 instruction as well and I have yet to get my G0704 running.

I know I have things wired correctly. Motors will not turn when powered on, but they do not jump like I've seen others do. Having the standard output problem everyone else is having as well.

It seems I'm not the only newb on here that would appreciate something a little simpler to just get things running so we can be machinist and not electrical engineers.

Now I bought the following kit on Automation Technologies Inc. (I will mention that they are very responsive at communication back to customers)

http://www.automationtechnologiesinc...c-120vac230vac

Is there anyone out there who has used this same kit or one very similar and can provide correct information for the rest of us who aren't really getting it?

I'm talking about shots of each tab of the configuration, an image of the C10 so we know our jumpers are correct, and where exactly the switches on the drivers are supposed to be positioned.

There is A LOT of try this try that happening in these forums. I really do not want that here. Please show us something that's complete and proven to work.

Any information you can share is appreciated, as long as it proven.

Realistically it would be nice to create a complete instruction for everyone's future benefit.