I have a Spectralight 0200(CNC Sherline mill) with 100 oz steppers on all axis's. Is it possible for me to change out just the Z axis motor to like a 200 oz motor while leaving the x and y with the 100 oz motors? Its been hanging every once in awhile, and I,m thinking maybe its a little light duty for the Z axis.
Thread: bigger stepper motor for Z axis?
Results 1 to 3 of 3
-
11-26-2007, 08:35 PM #1
Registered
- Join Date
- Feb 2006
- Posts
- 1187
bigger stepper motor for Z axis?
-
11-28-2007, 06:10 AM #2
Registered
- Join Date
- Feb 2006
- Posts
- 1187
Anyone out there?
-
11-28-2007, 01:03 PM #3
Registered
- Join Date
- Mar 2005
- Posts
- 1673
Hi,
Switching to a larger motor on your Z axis is ok. Obviously the drive will need to deliver the rated current if you want full torque.
John
Reply With QuoteSimilar Threads
-
looking for good price on 400 oz-in or bigger stepper motor
By mike10 in forum Stepper Motors / DrivesReplies: 9Last Post: 07-17-2008, 06:13 AM -
Z axis stepper motor
By phidab in forum Syil ProductsReplies: 4Last Post: 04-11-2008, 01:12 AM -
bigger motor runs, little ones don't...
By killer_cobra in forum Stepper Motors / DrivesReplies: 6Last Post: 04-01-2007, 02:30 AM -
3 axis stepper motor drive
By Paul V in forum Shopmaster/ShoptaskReplies: 6Last Post: 02-24-2007, 09:34 PM -
New Bigger Stepper Motor!
By widgitmaster in forum Stepper Motors / DrivesReplies: 3Last Post: 10-26-2005, 01:39 PM
Posting Permissions
