[dazp1976]

Great. Thanks for the info guys.
One last question about this board. I read on a couple of auctions this.

"Can be accessed by a common cathode or common anode input level to 5V drive."

Does this refer to the way the driver is connected to the board? As I said on my current board the connection between the drive and the board is like this.
But the diagram on the board auction shows the connection like this
Can I connect my drives to the board the way it already connected to the current board, like the 1st method? Or I have to switch to the 2nd wiring method?

If unsure I would always follow the included product diagrams myself.
My cheapo board is wired the same.as the 2nd.